Mr. Beer–The Fermenting is Done so It’s Time to Bottle!

IMG_2905 Mr. Beer Beer of the Month Club Receive everything you need to keep you brewing great tasting beer all year long.

A few weeks ago we brewed my first Mr. Beer brewing kit.  You can check out the original post HERE from Brew Day.  Since that time we waited a few weeks, and when we sampled the brew it was still sweet.  I suspect we just don’t have anywhere in our house in March that stays consistently warm enough to keep the yeasties active.  I did add some additional yeast a little over a week ago, so today it was time to bottle.

IMG_2906The Bottling process is really easy.  We mixed up the remaining sanitizer in a gallon of water, filled each bottle half-way, capped the bottles and shook each one allowing them to sit for 10-minutes.  It was a little odd that the rings at the bottom of the caps are designed to come off when you open he beer.  Of course they all came off when I opened the bottles to drain the sanitizer.  Purely cosmetic, but odd.

IMG_2907After sanitizing for 10-minutes, we drained each bottle and added 2 1/2 teaspoons of white sugar to each bottle.  This sugar gives the remaining yeast something to eat in order to carbonate the beer.

IMG_2908Of course the next step is to fill each bottle with beer.  This is a fairly slow process, since the tap is small.  I also tried to tilt the bottles to reduce foaming.  It was a bit of a struggle to fill the last bottle, since the level of beer was pretty close to the bottom of the tap, but we managed to fill all eight quart-sized bottles to just below the bump in the neck of the bottle.  This will allow for some expansion room as the brew carbonates.

IMG_2910We put the filled bottles in a dark and warm location to allow them to carbonate for a few weeks (probably 2 or 3).  I’d also recommend the next step…clean out the fermenter NOW.  It was real easy to clean all of the sediment and hop cones now while they are wet and I suspect it would have been awful later once it dried.

IMG_2911So there you have it.  After carbonating for a few weeks, it is recommended to condition the beer for a few weeks for improved taste (even though it is technically ready to drink after carbonating).  We DO plan to carbonate and condition so check back here in about 5 or 6 weeks for our first
Mr. Beer tasting. 

As you can see below we DID clean the keg and sample some beer now; and I’d still describe it as slightly sweet and slightly cidery tasting so we’ll see.  It could be we need to try again with warmer more consistent fermenting than our first batch.  I think this will be much easier to accomplish in May than it was in March…and thankfully the nice people at Mr. Beer sent me enough supplies to do a second batch of beer.
IMG_2913 IMG_2912
Mr. Beer Beer of the Month Club Receive everything you need to keep you brewing great tasting beer all year long.

About MyBeer Buzz

Founder, owner, author, graphic designer, CEO, CFO, webmaster, president, mechanic and janitor for mybeerbuzz.com. Producer and Co-host of the WILK Friday BeerBuzz live weekly craft beer radio show. Small craft-brewer of the craft beer news sites and one-man-band with way too many instruments to play........Copyright 2007-2024 mybeerbuzz.com All Rights Reserved: Use of this content on ANY site without written permission is not allowed.

4 comments (click to read or post):

  1. Good luck. Mine's been in the fermenter for 3 weeks & it's still cloudy. When you added more yeast, did you do anything special or just drop it in? I'm thinking of repitching this weekend and bottling next weekend (it's ~7% abv so it should be ok)

    ReplyDelete
  2. I just repitched and mixed it in a little without stirring up any sediment. 7%ABV ?

    ReplyDelete
  3. Yes I used a Pilothouse Pilsner refill (4.6% by itself) and added a creamy brown UME which adds 2.3%, and also added some cascade pellet hops. Should be 6.9% or so. It has a little caramel and coffee notes but isn't sweet.

    ReplyDelete
  4. Let us know how it comes out..

    ReplyDelete

Please leave a comment...I do moderate each comment so it may not appear immediately...and please be nice! You can also comment using Disqus (below) or even comment directly on Facebook (bottom).